{"product_id":"salomon-s-pro-supra-dual-boa-130-gw-boots-2026","title":"Salomon S Pro Supra Dual Boa 130 GW Boots 2026","description":"\u003ch2\u003eThe Boot\u003c\/h2\u003e\u003cp\u003eThe \u003ca href=\"\/collections\/salomon\"\u003eSalomon\u003c\/a\u003e S\/Pro Supra Dual BOA® 130 is a full-send expert boot built around one idea: two independent BOA® dials that let you micro-adjust cuff and lower shell tension separately, on the fly, with a glove on. One dial wraps the foot. One wraps the cuff. Together they create a hold that traditional buckle boots have a hard time matching for precision.\u003c\/p\u003e\u003cp\u003eThe shell is 100mm last polyurethane with Exowrap™ construction — shell and liner working as a single system to channel your input directly into the ski. Add a Power Spine metal bridge connecting cuff to shell, and you get a boot that rebounds hard and doesn't feel dead underfoot. The GripWalk sole (ISO 23223) is premounted, so you're walking the lodge stairs comfortably without swapping out soles.\u003c\/p\u003e\u003cp\u003eInside, the My Exowrap™ 4D Race liner has an elastic forefoot belt that tightens as you close the BOA®, pulling the whole package snug. The Sensitive² footbed adds heel-to-toe feedback you'll feel in your edging. A removable Custom Tongue 2 with edgeless construction means no pressure ridge across the instep and real options if you want to dial forward lean. The sensiFIT™ insert on the outer shell makes step-in feel easy even on a cold morning — no fighting the boot while your buddy waits at the lift line.\u003c\/p\u003e\u003cp\u003eAt $529.99, this is a lot of boot for the money. It's not a boot for someone still building their parallel turn — the 130 flex will work against you if you're not already charging groomers with commitment. But if you are, it rewards that.\u003c\/p\u003e\u003ch2\u003eWho It's For\u003c\/h2\u003e\u003cp\u003eAdvanced to expert skiers who want GS-level edge response in a boot they can actually live in all day. The 100mm last is a medium fit — it suits a foot that isn't particularly wide or narrow. Custom Shell™ HD heat molding can open it to roughly 106mm if your foot needs a little more room, and that process takes about 10 minutes in a shop.\u003c\/p\u003e\u003cp\u003eThe dual-dial closure system also makes this a strong pick for skiers who hate fussing with buckle micro-adjustments mid-run. You loosen, you tighten, you move on. That matters most on longer days with varied terrain and changing snow.\u003c\/p\u003e\u003ch2\u003eFlex \u0026amp; Fit\u003c\/h2\u003e\u003cp\u003eFlex 130 is stiff. It transmits energy fast, with very little lag between your input and the ski's response. That's what you want when you're laying over at speed on a firm groomer. It demands an active, forward stance — if you tend to sit back, a 130 will punish you.\u003c\/p\u003e\u003cp\u003eThe 100mm last runs medium volume. \u003ca href=\"\/pages\/ski-and-snowboard-boot-fitting\"\u003eOur boot fitting team\u003c\/a\u003e can heat-mold the Custom Shell™ HD on-site, usually while you wait. The liner's elastic belt cinches around the forefoot as the BOA® closes, so the fit gets progressively snugger without pinching — a noticeable difference from fixed-volume shells. The premounted 6mm rear spoiler sets forward lean out of the box; it can be adjusted by a bootfitter if you need more or less.\u003c\/p\u003e\u003ch2\u003eTech That Matters\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDual BOA® Fit System:\u003c\/strong\u003e Two independent screwed dials — upper cuff and lower shell. Each adjusts micro-tension separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExowrap™ Construction:\u003c\/strong\u003e Shell and liner are built to work together as one unit. The BOA® cables run through both, so closing the dials wraps everything — not just the outer shell — around your foot. It's a tighter, more uniform hold than cable systems that only run the shell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower Spine:\u003c\/strong\u003e A metal plate that bridges the cuff and lower shell. It stiffens the connection between the two and delivers clean rebound energy back through your leg when you come off a turn. No slop, no delay.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCustom Shell™ HD:\u003c\/strong\u003e Heat-moldable shell and cuff. Thin wall construction puts your foot closer to the shell material for better energy transfer once the boot is shaped to your foot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGripWalk Sole (ISO 23223):\u003c\/strong\u003e Premounted rocker sole for walkability off-snow. Compatible with GripWalk-compatible bindings — bring your skis in and we'll confirm binding compatibility before you buy.\u003c\/p\u003e\u003ch2\u003eWhy Willi's\u003c\/h2\u003e\u003cp\u003eWe've been fitting ski boots in Pittsburgh for over 50 years, and boots like this one are where that experience shows. Heat molding, liner work, spoiler swaps, footbed fitting — we do it all in-house at any of our three locations. Stop in and let's make it fit right the first time.\u003c\/p\u003e","brand":"Salomon","offers":[{"title":"Gray Aurora \/ 26.5","offer_id":48856504074445,"sku":"21530002449","price":529.99,"currency_code":"USD","in_stock":false},{"title":"Gray Aurora \/ 27.5","offer_id":48856504107213,"sku":"21530002450","price":529.99,"currency_code":"USD","in_stock":true},{"title":"Gray Aurora \/ 28.5","offer_id":48856504139981,"sku":"21530002451","price":529.99,"currency_code":"USD","in_stock":false},{"title":"Gray Aurora \/ 29.5","offer_id":48856504172749,"sku":"21530002452","price":529.99,"currency_code":"USD","in_stock":false}],"url":"https:\/\/www.willisskiandboard.com\/products\/salomon-s-pro-supra-dual-boa-130-gw-boots-2026","provider":"Willi's Ski \u0026 Board","version":"1.0","type":"link"}